FZB (L) small corrosion-resistant self-priming pump operation precautions

FZB (L) small corrosion-resistant self-priming pump in the course of use, if improper operation, it may cause damage to the pump, then the FZB (L) small corrosion-resistant self-priming pump operation should be used Note what matters? The following on the FZB (L) small corrosion-resistant self-priming pump operation precautions introduced. FZB (L) small corrosion-resistant self-priming pump operation Precautions 1. Check the motor running direction and the pump running direction mark is consistent, do not reverse! 2. The pump body to be filled with liquid to start the operation, is strictly prohibited air transport . Pump within the scope of the specified self-priming if 3 to 5 minutes can not be a liquid, stop immediately check the reasons to prevent the pump working fluid warming, damage to the pump. 3. The first injection of liquid in the pump generally do not need to re-injection, but long downtime or shut down after the seal leak exists, the pump liquid loss, the second car should check the pump before the memory liquid situation, Add liquid before driving. 4. Long-term winter when not used, should be drained to the pump body of liquid, so as to avoid freezing, can not work properly. Extended reading: China Construction Water Exhibition water pump manufacturers rankings ptc exhibition motor top ten brands pump valve pipe fittings Show Information Industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: // mj .liuti.cn / (Service Hotline:)

Niobium Wire have high melting point and good corrosion resistance and cold-workability, can be used for chemical and electronic industry , aviation and aerospace industry, also mainly used to make high pressure sodium lamp , structural material for airspace engine, reaction container during chemical process, heat exchanger, reactor internal components and sleeve materials. 

The noibium wire  surface should be smooth, clean and free of grease, cracks and burrs. No mess around. Knotting, cross, etc. We can produce  the diameter from 0.1mm to 4.0mm or as your requirement.


Niobium Wire

Niobium Wire,High Purity Niobium Wire,Niobium Metal Wire,Pure Niobium Wire

Baoji Shengyuan Metal Material Co., Ltd. , https://www.baojisymetal.com